HDD GURU FORUMS

Hi everyone, this is the first post I've written, so I apologize in advance if I'm not clear. I use MRT and I'm trying to have access to this SSD. It mounts an SM2258H chip, when I try to recognize it I get no results. Who could tell me how to go to SAFE MODE? I tried some pins, but I'm afraid of doing damage and ruining the SSD. I attach the photo of the card.

Thanks in advance.

PS: I saw on the PC3000 tutorial that even if it is not listed this type of SSD can be read by choosing one of the star family.

I think ROM mode is selected by P13 in the top group of 8.

Silicon Motion SSD Reference Circuits:

https://www.hddoracle.com/viewtopic.php?p=22726#p22726
https://www.hddoracle.com/download/file.php?id=9649

Recovering one right now, with a SM2258XT, but 512GB.

The safe mode pins are the ones marked.

which loader you've selected?

What's your chip ID?

Basic SSD information:
Read chip information : ......................: success
Chip id : ....................................: 0xAD3E1AA36325
Vendor : .....................................: Hynix
Flash type : .................................: 16nm QLC 16k
Chip capacity : ..............................: 8192 Mb
channel number : .............................: 1
Chip number per channel : ....................: 4
Chip layers : ................................: 2
Number of logical units : ....................: 1
Number of chip storage blocks : ..............: 0x1000
Number of pages per storage block : ..........: 0x100
Page size : ..................................: 0x2000
Maximum retry level : ........................: 0x0

Mine have Micron chips.

Sorry for my mistake. I was confused by the silkscreening.