| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| PWR off for an SSD drive http://forum.hddguru.com/viewtopic.php?f=10&t=44380 |
Page 1 of 1 |
| Author: | sosrecup [ June 11th, 2024, 7:53 ] | |||
| Post subject: | PWR off for an SSD drive | |||
Hello, How to deal with an SSD when the PWR is OFF in PC3000 (even if you shortcut it). Is there a way to fix it, or do you need to move the controller + chips to the same model SSD? Than you in advance
|
||||
| Author: | fzabkar [ June 11th, 2024, 12:54 ] |
| Post subject: | Re: PWR off for an SSD drive |
Measure the voltages between each inductor and ground. Chip transplants are for mechanics, not electronics technicians. |
|
| Author: | sosrecup [ June 12th, 2024, 8:46 ] |
| Post subject: | Re: PWR off for an SSD drive |
Hello, Thank you for your help. Could you please show the points on the PCB? I have limited knowledge of Electronics  Thank you in advance. |
|
| Author: | fzabkar [ June 12th, 2024, 12:03 ] |
| Post subject: | Re: PWR off for an SSD drive |
Ground is any screw hole. Inductors are those ferrite bodied components adjacent to each of the 3 DC-DC converters. The inductors are shaped like squares with chamfered edges. |
|
| Author: | sosrecup [ June 13th, 2024, 2:19 ] | ||
| Post subject: | Re: PWR off for an SSD drive | ||
Hi fzabkar, Are you talking about those 2 components? Thanks in advance for your help.
|
|||
| Author: | fzabkar [ June 13th, 2024, 2:42 ] |
| Post subject: | Re: PWR off for an SSD drive |
https://image.made-in-china.com/44f3j00yTLlFbnWkSrv/Surface-Mount-1uh-Ferrite-Core-Power-Coil-SMT-Nr8040-1r0-Power-SMD-Inductor-for-Digital-Movie-Cameras.webp |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
