HDD GURU FORUMS

Can anybody help detect my WD 240GB SSD
The SSD is warming but not detected on device manager. Thank You! Please help

Measure the voltages at the e-fuse and the inductors surrounding the PMIC.

If they are OK, short the safe mode / ROM mode test points and see whether the controller identifies itself.

Can you please elaborate me step by step. By marking on the picture. I don't know which one is which Please. Thank you!

I shorted the JP1!. Devmgr shows SanDisk Milpitas and there's no disk on disk management! Showing Disk 3 Unknown Not Initialised.

It looks like your SSD has a firmware fault.

As for step-by-step instructions, I have been through this process hundreds of times at this place and others. Also, I've written plenty of tutorials on the subject at HDD Oracle. Please take the time to learn something. After you learn how to drive one car, do you expect that you will need to repeat the process for every other car?

So how do I repair this firmware fault.

fzabkar wrote:It looks like your SSD has a firmware fault.

As for step-by-step instructions, I have been through this process hundreds of times at this place and others. Also, I've written plenty of tutorials on the subject at HDD Oracle. Please take the time to learn something. After you learn how to drive one car, do you expect that you will need to repeat the process for every other car?

Any links please and how do I repair this firmware fault Please! Thank you!

So this can't be fixed??