| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Crucial bx500 1tb no power http://forum.hddguru.com/viewtopic.php?f=10&t=45334 |
Page 1 of 1 |
| Author: | KiTHardWare [ May 19th, 2025, 12:52 ] | ||
| Post subject: | Crucial bx500 1tb no power | ||
Need help with this case In pc3k utility no power at all After making fast diagnosis ( no short to ground ) I need to know which component to measure to fix this problem
|
|||
| Author: | fzabkar [ May 19th, 2025, 13:21 ] |
| Post subject: | Re: Crucial bx500 1tb no power |
Check the input and output of the e-fuse (Current Limit Switch): https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5036A/ Then measure the voltages at each of the 3 inductors. |
|
| Author: | KiTHardWare [ May 19th, 2025, 14:03 ] |
| Post subject: | Re: Crucial bx500 1tb no power |
fzabkar wrote: Check the input and output of the e-fuse (Current Limit Switch): https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5036A/ Then measure the voltages at each of the 3 inductors. EN = 4.2v Dv/Dt = 5v Source = 5v Vin = 5v Gnd & Limite = 0v Both indectors = 5v |
|
| Author: | Lardman [ May 19th, 2025, 14:14 ] |
| Post subject: | Re: Crucial bx500 1tb no power |
KiTHardWare wrote: Both indectors = 5v I think you may want to check those again, all 3 of them not just 2.
|
|
| Author: | fzabkar [ May 19th, 2025, 14:16 ] |
| Post subject: | Re: Crucial bx500 1tb no power |
https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2152/ https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2151/document_id/4678/ (MP2151GTF-12) https://i0.wp.com/theoverclockingpage.com/wp-content/uploads/2022/11/ssd-crucial-bx500-500gb-vrm-2.jpg |
|
| Author: | KiTHardWare [ May 19th, 2025, 14:33 ] | ||
| Post subject: | Re: Crucial bx500 1tb no power | ||
Lardman wrote: KiTHardWare wrote: Both indectors = 5v I think you may want to check those again, all 3 of them not just 2.Thx i already check the third one on the top all work fine I figured out the problem the 4 sata lines is damage
|
|||
| Author: | KiTHardWare [ May 19th, 2025, 14:34 ] |
| Post subject: | Re: Crucial bx500 1tb no power |
fzabkar wrote: https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2152/ https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2151/document_id/4678/ (MP2151GTF-12) https://i0.wp.com/theoverclockingpage.com/wp-content/uploads/2022/11/ssd-crucial-bx500-500gb-vrm-2.jpg Thx bro for resources case solve |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
