| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Transcend SD with 8Gb capacity http://forum.hddguru.com/viewtopic.php?f=10&t=45448 |
Page 1 of 1 |
| Author: | BayanatA.jo [ July 2nd, 2025, 11:01 ] | ||
| Post subject: | Transcend SD with 8Gb capacity | ||
I received this SD and it's showing 8GB capacity, ofc its zeroes since the original capacity is 64GB. The client said that he tried chkdsk on it and that was it, Any recommendations? I'll attach a picture
|
|||
| Author: | martyjelen [ July 3rd, 2025, 10:05 ] |
| Post subject: | Re: Transcend SD with 8Gb capacity |
Remove the monolith and brush it. Do you have PC3000 flash or VNR? |
|
| Author: | arvika [ July 4th, 2025, 12:50 ] |
| Post subject: | Re: Transcend SD with 8Gb capacity |
I think no need even dissasembly the monolith from plastic case. Look on area near connector and compare traces with SD v99, v101, v109, v113, v116 from my DB: https://www.flash-killer.com/monolith-database |
|
| Author: | BayanatA.jo [ July 8th, 2025, 8:54 ] | ||
| Post subject: | Re: Transcend SD with 8Gb capacity | ||
Here is a clear picture< any recommendatios??
|
|||
| Author: | Gregory [ July 8th, 2025, 17:02 ] |
| Post subject: | Re: Transcend SD with 8Gb capacity |
Ask Denis from greydcode.com if the memory is recoverable, this card is in his database under the number SD 140, but there is no detailed information (it is possible that it is a low voltage of 1.25V and a problem with communication and/or signal capture on LA), only the information that is 2 layer pinout. You definitely can't assume that it has 100% LDPC, maybe is BCH. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|