| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| SanDisk Cruiser 512GB http://forum.hddguru.com/viewtopic.php?f=10&t=45598 |
Page 1 of 1 |
| Author: | bos [ September 5th, 2025, 9:10 ] | |||
| Post subject: | SanDisk Cruiser 512GB | |||
Controller: SD 20-82-00709-B0 NAND: 1316DXGVK0A3, BGA (ID unknown, haven't desoldered) VNR Solutions Database has 20-82-00709-A0 and A1 but not -B0. NAND is BGA but I cannot find a datasheet so I'm reluctant to desolder until I know which kind of BGA is on it. Has anyone worked with this UFD before?
|
||||
| Author: | bos [ September 5th, 2025, 9:14 ] |
| Post subject: | Re: SanDisk Cruiser 512GB |
I have tried the most obvious first: check for cracks in solder (common problem with SD-UFD), replaced connector, used a USB2-connector but no reaction at all. When I hook ut up with external 5V I see some activity, about 80mA is pulled. However, controller does not identify, dmesg does not even react with a message in syslog or anything like that. |
|
| Author: | arvika [ September 13th, 2025, 9:29 ] |
| Post subject: | Re: SanDisk Cruiser 512GB |
This one can be solved with chip-off method. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|