HDD GURU FORUMS
http://forum.hddguru.com/

SA backup for SanDisk SD7SN6S-512G needed please!
http://forum.hddguru.com/viewtopic.php?f=10&t=45970		 Page 1 of 1
Author:  beefstrudel [ April 9th, 2026, 20:36 ]
Post subject:  SA backup for SanDisk SD7SN6S-512G needed please!
I know this is a long shot but if anyone has a SA backup from this SSD can you please upload it? I just need module 15_cmbecfg

Thanks!!
Author:  beefstrudel [ April 9th, 2026, 21:53 ]
Post subject:  Re: SA backup for SanDisk SD7SN6S-512G needed please!
Never mind! It was DC_satacfg. The drive would ID as 137GB and all 48 bit commands abort.
The drive wasn’t having translator issues, its ATA IDENTIFY template in SA module DC_satacfg had corrupted capability words, so LBA48 and UDMA were being advertised as unsupported.
Patching those identify words (83/86/88, plus checksum) restored full 512GB LBA48 addressing and UDMA operation.
Uploading original and fixed modules in case it may help someone in the future.

Attachments:
DC_satacfg_fix.zip [2.13 KiB]
Downloaded 72 times
Author:  fzabkar [ April 10th, 2026, 14:40 ]
Post subject:  Re: SA backup for SanDisk SD7SN6S-512G needed please!
How did the drive get into that state? It sounds like a problem related to DCO (ATA Device Configuration Overlay), in which case HDAT2 may have been able to restore it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/