| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| BestMemory - Highlander series - 480GB (SM2258XT) http://forum.hddguru.com/viewtopic.php?f=10&t=46212 |
Page 1 of 1 |
| Author: | grevan [ August 4th, 2026, 15:42 ] |
| Post subject: | BestMemory - Highlander series - 480GB (SM2258XT) |
BestMemory - Highlander series - 480GB (SM2258XT) Hello, i have this SSD, 480GB in safe mode, reporting 1GB in MRT. PCB has 2 NAND chips, and PCB number is "SM2258XT_......_R0724" Choosing SandiskPlus family - SM2258XT i get this: Code: Selected family : ............................: SanDisk SSD SM2258XT Master Controller model : ....................: SM2258XT Chip id : ....................................: 0x453C98B37672 Vendor : .....................................: Sandisk SSD state: Wether it is in a ready state : ..............: Yes Firmware working mode : ......................: ROM SSD error code : .............................: 0x00(No error) Whether SSD is locked : .....................: No Whether in safe mode : .......................: Yes Whether access user area : ...................: No Whether access SA : .........................: No Load loader... Default Loader name : ........................: S1022A0 BiCS3_02 Write default Loader : .......................: success Load default Loader code : ...................: success Obtain Loader version from firmware : ........: After that asks to load loader manually, choosing "S1022A0 BiCS3_02" gives me better result, but.... Code: Read Loader : ................................: success Loader name : ................................: S1022A0 BiCS3_02 Write to Loader : ............................: success Execute Loader code : ........................: success SSD state: Wether it is in a ready state : ..............: Yes Firmware working mode : ......................: LDR SSD error code : .............................: 0x00(No error) Whether SSD is locked : .....................: No Whether in safe mode : .......................: No Whether access user area : ...................: No Whether access SA : .........................: Yes Load loader : ................................: success Basic SSD information: Read chip information : ......................: success Chip id : ....................................: 0x453C98B37672 Vendor : .....................................: Sandisk Flash type : .................................: 64L BiCS3 QLC 16k Chip capacity : ..............................: 8192 Mb channel number : .............................: 1 Chip number per channel : ....................: 4 Chip layers : ................................: 2 Number of logical units : ....................: 1 Number of chip storage blocks : ..............: 0x1000 Number of pages per storage block : ..........: 0x100 Page size : ..................................: 0x2000 Maximum retry level : ........................: 0x0 Load relocation block table : ................: Fail Code: Load CP list...... CP list data is not found in HDD, use the default CP list! Load CP list... : ............................: success Read password information... Read password information : ..................: Fail Of course it fails trying to "create virtual translator" Tried some other loaders, including "R0724A0...."(because of PCB number) but they all fail in "Write to loader" and "Load loader". Downloaded a few "SM2258XT......BiCS3......" over the internet but all "MPISP2258.bin" fail to "write to loader". Does it matter when MRT chooses first to load "S1022A0 BiCS3_02" by default after selecting family, and before choosing the loader manually? Thanks |
|
| Author: | Lukas [ August 5th, 2026, 4:53 ] |
| Post subject: | Re: BestMemory - Highlander series - 480GB (SM2258XT) |
grevan wrote: Does it matter when MRT chooses first to load "S1022A0 BiCS3_02" by default after selecting family, and before choosing the loader manually? You can rely on what the program automatically selects, but in these controllers, LDR selection often has to be performed manually with the appropriate configuration/memory type: https://hex-serwis.pl/blog/odzyskiwanie ... 0-sm2258xt |
|
| Author: | grevan [ August 5th, 2026, 18:17 ] |
| Post subject: | Re: BestMemory - Highlander series - 480GB (SM2258XT) |
Thank you Lukas, do you have any hints for what i should look for? Nand is 45 3C 98 B3 76 72 64L BiCS3 QLC 16k Do you edit the MPISP2258.bin file? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|