| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Micron 1300 SATA SSD (256GB), firmware http://forum.hddguru.com/viewtopic.php?f=10&t=46304 |
Page 1 of 1 |
| Author: | simoncana [ September 20th, 2026, 19:15 ] |
| Post subject: | Micron 1300 SATA SSD (256GB), firmware |
Hello,I am looking for a working, full 4MB EEPROM dump (.bin / .rom) to revive a dead Micron 1300 SATA SSD (256GB). The drive is completely unresponsive in BIOS. I checked the onboard MXIC flash chip, and it is a Macronix MX25L3233EZNI (32 Mb / 4 MB capacity). The original firmware listed on the label is HPC0032, but a standard Micron M5MU030 dump will also work, as long as it is a complete 4,194,304 bytes readout from a hardware programmer. I did manage to extract a firmware binary from the official update package, but it is only 1.4 MB, meaning it is just a partial update payload and lacks the required boot sector data. If anyone has a donor dump available from a working drive, I would highly appreciate it if you could share it.Thank you! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|