Page 1 of 1

BarraCuda ZA250CM10002 controller STXZA01EA3B7

Posted: October 6th, 2026, 11:47
by DRI-Lab
Hello,
I need to now how to short this SSD to bring it in safe mode.
It's seem to work but the 10% of files are blank so I'd like to try the PS3110 LDR to create the translator.

Thanks a lot
Donato

Image

Re: BarraCuda ZA250CM10002 controller STXZA01EA3B7

Posted: October 7th, 2026, 9:50
by DRI-Lab
here the picture

Re: BarraCuda ZA250CM10002 controller STXZA01EA3B7

Posted: October 7th, 2026, 10:06
by vx1
I would try those test points.

Re: BarraCuda ZA250CM10002 controller STXZA01EA3B7

Posted: October 7th, 2026, 10:15
by fzabkar

Re: BarraCuda ZA250CM10002 controller STXZA01EA3B7

Posted: October 7th, 2026, 10:46
by DRI-Lab
Thank you.
Meanwhile I've found this short for safe mode, what do you think about?

Re: BarraCuda ZA250CM10002 controller STXZA01EA3B7

Posted: October 7th, 2026, 13:20
by fzabkar
From my HDD Oracle link ...

This thread talks about the safe mode shorting point for a Toshiba TC58NC1000GSB controller (rebadged Phison PS3110s):

https://forum.acelaboratory.com/viewtopic.php?t=8881

The shorting points are claimed to be "3V3" and "GPIO0". I can't see whether any resistors are involved, but the GPIO (General Purpose Input Output) pads would be connected to the controller's I/O section.

Here is a similar SSD:

https://i0.wp.com/www.thessdreview.com/wp-content/uploads/2014/08/Phison-Controller-1.jpg