HDD GURU FORUMS
http://forum.hddguru.com/

Intenso 256GB - dead
http://forum.hddguru.com/viewtopic.php?f=10&t=46433
Page 1 of 1

Author:  hotspot [ November 19th, 2026, 11:11 ]
Post subject:  Intenso 256GB - dead

Hello forum,

let me introduce myself briefly, i am an electronic engineer from Germany and htis is my first encounter with SSD failures.
So i dont know about PC3000 or SMI MP-Tool .

I had this Intenso 256gig SSD drive plugged into USB via USB-Adapter and last action was to erase a bigger file.
I then just pulled it out of the USB port of the Windows PC.

Later re-inserting it - and - nothing. No Drive Letter appeared. It was non existend. completely dead.

I had some important files on it.

Ok, i searched the forums, reading about ROM mode, flash chip identification, PC3000 rescue software and the SMI tools.

I checked the Voltages, 3.3V, 1.2V and 0.9V, all good.

There are 3 LEDs og which the middle LED was constantly on, indicationg ? Power?

Then there are these jumper connectors, 2 upper, 4 lower.
I guess the top one is for ROM mode, the others are ??? what?

ROM mode is when the sm2259 controller enters a service mode ?

What can you then read out of it ?

ched some light in my empty brain ;)

Attachments:
myssd.jpg
myssd.jpg [ 2.25 MiB | Viewed 197 times ]

Author:  fzabkar [ November 19th, 2026, 12:17 ]
Post subject:  Re: Intenso 256GB - dead

Did the SSD identify itself in ROM mode?

For reference ...

BL8028, Shanghai Belling, Synchronous Buck Converter, 1.5A, 2MHz, 2.6V - 5.5V in, marking GUyw, SOT23-5:
https://www.belling.com.cn/media/file_object/bel_product/BL8028/datasheet/BL8028_V1.13_en.pdf

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/