Hello all,

Does anyone have the firmware modules for the following drive, so that I can re-flash it with my PC-3000.

Hitachi Deskstar Model: HDP725050GLA380 MLC: BA2727 P/N: 0A36918 0A36918BA27270C85
The PCB has the code: 0A29738 BA2631 ZzK818 018G on the QR Sticker.

I've had a look on the files list here, but there is only the HDP...360 listed.

Many thanks,

Mark

What is wrong with the drive?

_________________
You don't have to backup all of your files, just the ones you want to keep.

Hello,

I have 2 Hitachi hard drives, both with a similar problem. They power up, but I have the click of death on both of them. The SA area isn't been read, so they do not show on my Deepspar FDI, PC3000 or TD1.

I have attached it to my Atola Insight, and after it Auto Diagnostic it says there is a problem with the 5V consumption. I have tested the TVR Diodes, but they are both transmitting 12 & 5V as they should.

I wanted the firmware so I could attach the PCB to my PC3000 and reflash it to see if it fixes it.

If this doesn't work, I was going to try and find donor drives.

Can you offer any help/advice?

Many thanks,

Mark

See other thread

_________________
You don't have to backup all of your files, just the ones you want to keep.