View topic - Error terminal

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Error terminal

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

sempre

Post subject: Error terminal

Posted: August 9th, 2011, 15:38

Joined: October 14th, 2005, 9:26
Posts: 1060

Rst 0x20M
ASCII Diag mode

F3 T>/2

F3 2>Z

ExecuteSpinRequest
HighPowerMode = 0100
DiagError 00006002
F3 2>U

ExecuteSpinRequest
Spin Up Complete
Elapsed Time 6.556 secs
F3 2>/1

F3 1>N1

Failed to load overlay 00000004
LED:000000CC FAddr:0028540B
LED:000000CC FAddr:0028540B
LED:000000CC FAddr:0028540B

_________________
Нет ничего невозможного

Top

einstein9

Post subject: Re: Error terminal

Posted: August 9th, 2011, 16:16

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait

Quote:

F3 1>N1

Failed to load overlay 00000004
LED:000000CC FAddr:0028540B

find the 2 points and try it

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Top

hddguy

Post subject: Re: Error terminal

Posted: August 19th, 2011, 11:44

Joined: November 9th, 2006, 15:15
Posts: 2984

sempre wrote:

What HDD is this?

IF is 7200.12 / Barracuda LP then 'N1' command does not work.

Also 'Failed to load overlay 00000004' can sometimes be related to a hardware error.

With PCB and HSA attached does the HDD remain powered, or its spindle stops?

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: arroo and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum