Hi guys
I have this disk ,ST1000LM049-2GH172-LXM3, that came to me with this error:
Code:
Boot 0x80M
Rst 0x80M
Srv DETCR init 0x0000
FTU
PrgF
(P) SATA Reset
RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
LED:0x000000BD FAddr:0x0000783A
LED:0x000000BD FAddr:0x0000783A
LED:0x000000BD FAddr:0x0000783A
Boot 0x80M
Tech Unlock Handshake: 0xB3CEBE38
Reply:
Rst 0x80M
Srv DETCR init 0x0000
FTU
(1Ah)-Serial Port Not Ready
PrgF
(P) SATA Reset
RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
LED:0x000000BD FAddr:0x0000783A
LED:0x000000BD FAddr:0x0000783A
LED:0x000000BD FAddr:0x0000783A
To enter terminal I have tried many things: play with HM in Rom, short on different boot times, play with options in ROM, loader, etc. No way I can enter terminal or get RDY over ATA because all I get is LED: BD error in the end(BSY on ATA of course). Searching on net for fw backup result in 0 responses. I have managed to temporally get 2 disks with the same fw, LXM3, but without luck, the overlays are build in 2017 compared with the pacient disk that have overlays build in 2018. So the loaders from those 2 donors was useless.
What I need is a LXM3 fw backup, more exactly sys file 20D or mod 3D or a loader with this parameters:
Code:
CODE info
#########
Bank 0
ProdType................. : RX22.LIM1QBF
Controller FW Rev........ : 04130215
Customer Release......... : LXM3
Changelist............... : 01457828
Build date / time........ : 4/13/2018 2:15:28 AM
Package Global ID........ : 00503762
Package Builder ID....... :
Build Rev................ :
Package Rev.............. : CD2813
Pkg P/N.................. : 100836332
Servo FW................. : 7889 / ---- / ---- / ----
Package Version.......... : RX22.LIM1QBF.CD2813.LXM3
Pkg CFW Ver.............. : RX22.LIM1QBF.01457828.00503762
Family Rosewood AE.
Thanks
Regards