MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
Core.iStores
 Post subject: ST500LM000 Busy
PostPosted: October 2nd, 2024, 7:40 
Offline

Joined: April 9th, 2021, 3:47
Posts: 143
Location: Yemen
i have an issue with ST500LM000 PCB it gives "SMI Init (or) Training Failed 0x000000D2" in terminal & PCB No. is "100705349 REV D"

i replaced it with PCB "100731589 REV A" after clearing the NAND and swapping the ROM Chip

the issue is the donor PCB keeps BUSY all the time with no access to terminal


can any one help me with this please ?
Top
 Profile  
 
Lukas
 Post subject: Re: ST500LM000 Busy
PostPosted: October 4th, 2024, 5:15 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 126
Location: Poland
How did the disk behave before the PCB replacement?
Have you read the PC3000 manual for the F3 section 4.4?

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
MindMergepk
 Post subject: Re: ST500LM000 Busy
PostPosted: October 4th, 2024, 10:56 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 838
Location: Pakistan
perhaps you need the same REV as patient, never tested on different REV.

_________________
Data Recovery Pakistan
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group