SEAGATE SELFSCAN

[zebong]

Hi, anyone know this

Afther a selfscan it appear´s this message:

Interface task reset
1024k x 16 buffer detected
SNOWMASS - 2_Disk 3.19 11-20-01 12:12

Power Cycling
ATReset
Head Mask 000F - Switch to full int.
Spin Ready
Begin Test 08

Not Power Cycling
SkpCylList deleted
Sys= 7000-7028 02B9 SPTK on sys trks
<empty>
drive must be reformatted
EP=0, TA=0, HiGain=1, OTRd=0, Early Rd=0, Splash=1, Reload=1, VCO=1, MRBias=1
Bst/Zap=0, SrvoThrsh=1, RunOut=1, MaxECC=1, ECC 2=1, ECC 1=1, ECC 0=1
Data=FF, Write=80, ID=FF


Thanks
ZeBong

[networkpc3000]

are you sure it's complete? i don't think so!

[rameez]

Let the test complete test 8 takes alot of time be petient .

[jono-ats]

I've never had much luck with Seagate's selfscan. I think it should be renamed, "self-destruct."

I've used it with drives that had problems. After running the test(s), the drives would always be busy and never come ready.

Impressive amount of test messages from terminal mode, though!