Discussions related to PC-3000
Please no pirated software here!
January 29th, 2009, 9:08
Hi Anyone can tell-me what i have to do is this terminal error:
- Code:
Reset
4096k x 16 DRAM
VENUS - 1_Disk S-0C 12-12-06_13:23
HM SFI
!
$($01D0C,00E74,0000,00,51,70,01)HM REG701 8B
HM SFI
!
ERR Read App Code
F>
Thanks
ZeBong
January 29th, 2009, 10:17
Is PCB native?
January 29th, 2009, 10:29
Probably bad/weak head and perhaps also damage to platters.
Sometimes this drive can still be copied using a loader, but much depends of the state of the heads and platters.
Dobre
January 29th, 2009, 11:33
Is it a 3.CAE firmware drive?
January 29th, 2009, 15:34
The PCB is the native one.
The drive is: ST9160821AS FW: 3.ALC
I open it and i notice that the heads stop at the middle.
Them it give this in terminal.
- Code:
ERR Read App Code
F>
January 29th, 2009, 16:35
Probably bad/weak heads then.
January 29th, 2009, 19:31
pcimage wrote:Is it a 3.CAE firmware drive?
Do you have a loader with this firmware?
January 29th, 2009, 21:33
zebong wrote:The PCB is the native one.
Doesn't look native to me
Powered by phpBB © phpBB Group.