Hitachi HTS543225A7A384 - error in RAM
October 19th, 2013, 1:49
Hello!
I change Heads Unit, then when run the utility, passport can not be read, but after restarting the utilities - read the passport and backup SA.
But in the Status Utility - error in RAM.
In DE read through the active tool, an UDMA - ERR, ABR.
Analyse log found that in this mode to read about only 50 million LBA.
Please tell me what to do to access the all User area?
I read that the compiler is not loaded into the RAM - and in my case (PCHT in RAM empty).
I change Heads Unit, then when run the utility, passport can not be read, but after restarting the utilities - read the passport and backup SA.
But in the Status Utility - error in RAM.
In DE read through the active tool, an UDMA - ERR, ABR.
Analyse log found that in this mode to read about only 50 million LBA.
Please tell me what to do to access the all User area?
I read that the compiler is not loaded into the RAM - and in my case (PCHT in RAM empty).
Re: Hitachi HTS543225A7A384 - error in RAM
October 21st, 2013, 13:19
A lot of people are in the same boat with these, including us 
Powered by phpBB © phpBB Group.