Hi,
What exactly is needed?
Mikippp
WD3200BMVW-11S5XS0
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 2
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1437
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 23.1UC
>ROM generation.......................... : 23.1VC
>Link table version...................... : TP.2E.
>Consolidated ROM version................ : 0023001U
>
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 73 561
>SA regions address...................... : by default
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 2
>Heads number in use..................... : 2
>Switched off heads...................... : No
>Heads map............................... : 0,1
>ROM Firmware version.................... : 0023001U
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
- Attachments
-
- ROM.zip
- ROM+11.rpm
- (641.81 KiB) Downloaded 496 times