USB to Sata Converter

[Miss Di]

Hello,

I have a WD5000BMVW 500GB USB disk. No clicking sound and do not recognized on PC.
I swap ROM chip from USB PCB 771814 to SATA PCB 771820. Then connect it to PC3000 and no green lights on PC3000, seems disk is dead but I swap the ROM chip to 3 different SATA 771820 and same result.

Any idea why do not work?

Rgds,

[jermy]

swapped physically or flashed the ROM

[Miss Di]

swapped physically

[jermy]

try to read the ROM with an external programmer (or any other way), and take a good working PCB and flash the ROM with a programmer or using PC3K.

[day1data]

try to read the ROM with an external programmer (or any other way), and take a good working PCB and flash the ROM with a programmer or using PC3K.

+ 1 Agree.

Its either the ROM checksum doesn't pass or pre-amp.

[AdrianSRD]

Hello!

I found myself in a similar situation and it was the ROM, damaged. So i had to rebuild ROM from SA using PC3K and flash it to a donor PCB.

<Good luck

[Miss Di]

Yeah it is ROM damaged.

AdrianSRD, was your disk a USB drive like mine? Which type of donor you choose, a match USB drive?
I was speaking with ACE Support and their solution is just for drives with internal ROM (no U12 chip). My disk has an external ROM.

Any other ideas?

[jermy]

what's the DOM ?

[Miss Di]

Do you mean DCM?

the disk is:
WD5000BMVW-11AMCS4
Date: 8 June 2012
DCM: HHOT2HN

Rgds,

[jermy]

can you upload the damaged ROM ?

[Amarbir[CDR-Labs]]

Hello,

I have a WD5000BMVW 500GB USB disk. No clicking sound and do not recognized on PC.
I swap ROM chip from USB PCB 771814 to SATA PCB 771820. Then connect it to PC3000 and no green lights on PC3000, seems disk is dead but I swap the ROM chip to 3 different SATA 771820 and same result.

Any idea why do not work?

Rgds,

Hi ,
Have You Ruled out a Possible HSA Short ? . Do You Know How To Test that if Not i Can Teach You

[eng.mas]

It's good to share us that

[Amarbir[CDR-Labs]]

It's good to share us that

Hi ,
If you wanna learn ,post a new thread and pm me the link of the same i will do the needful .In this thread i will is the thread opener wants .

[Miss Di]

Hello,

Amarbir, If it is a HSA Short, would the disk try to read with a good PCB from another disk (without ROM changed)? Can you please share with us how to test HSA Short?

Jermy, I can read the ROM in the TL866. File attached.

Thanks.

[Miss Di]

ROM file now attached. Please change the extension to .bin

Attachments

ROM_WD5000BMVW.doc

(256 KiB) Downloaded 1092 times

[eng.mas]

It's good to share us that

Hi ,
If you wanna learn ,post a new thread and pm me the link of the same i will do the needful .In this thread i will is the thread opener wants .

Ok, Ill do as u want

[fzabkar]

The ROM looks OK.

Code:

Analysing ROM_WD5000BMVW.bin ...

Searching for LDSCs and verifying PCMBlocks ...

LDSC   LDSC    PCMBLock       PCMBlk CS
Start  ID CS   Start - End     Exp/Act
---------------------------------------
00000  5A 81   00100 - 019B1  B992 B992   OK
00020  01 59   019B2 - 03A1A    03   03   OK
00040  02 78   03A1B - 0D653    95   95   OK
00060  03 03   0D654 - 0DB08    17   17   OK
00080  04 93   0DB09 - 0DD69    77   77   OK
000A0  05 28   0DD6A - 0DF8A    B9   B9   OK
000C0  06 59   0DF8B - 2AC07    59   59   OK
000E0  07 CF   2AC08 - 3DF88    D3   D3   OK

LDSC   = PM Loader Config String (32 bytes)
ID     = ID byte of LDSC (byte #0)
CS     = Checksum byte or word
PCMBlk = Program Code Memory Block
Exp    = Expected checksum for PCMBLock
Act    = Actual checksum for PCMBLock

Code:

4F.BIN: 1024 bytes      checksum32 = 0x00000000
47.BIN: 1024 bytes      checksum32 = 0x00000000
0D.BIN: 144 bytes       checksum32 = 0x00000000
30.BIN: 1024 bytes      checksum32 = 0x00000000
0B.BIN: 336 bytes       checksum32 = 0x00000000
0A.BIN: 64 bytes        checksum32 = 0x00000000

If you want to test for a shorted preamp, upload detailed photos of both sides of your PCB.

[Miss Di]

Thanks fzabkar,

Here are the PCB photos. The ROM is not on the photo as I took it out to read in TL866.

[fzabkar]

Can you measure the voltages between ground (any screw hole) and each of the 18 pins at the HDA connector on the PCB?

Attachments

HDA_conn.jpg (111 KiB) Viewed 19351 times

[Miss Di]

Hello,

Just measure the voltage as suggested and I got value between 0.13V to 0V.
What should be the expected values?
What are we testing here?

Rgds,