LDR for WD2500AAJB-00WGA0

[outbreak198x]

Hello,

anyone out there having such a LDR? :=)

ROM FW is 005800AA - Firmware i can not read out.

I think it's head damage (Because also scratches on disk) - but i'll try - with Files from database (it's not compatible)

[outbreak198x]

FW should be 58.AAD
Headmap is 0,1,2.

maybe also someone having such a disk and can send it with Express?

[jermy]

Headmap is 0,1,2.

you sure ? here is written otherwise, 0,1,3

maybe also someone having such a disk and can send it with Express?

they can provide you a LDR (and resources) and they will ship it to you too

[Tomset]

Are:
WD2500AAJB-00WGA0-00.02C01-(58.AAD)-WCARY
WD2500AAJB-00WGA0-58.01H58-(58.AAH)-WCAS2

[outbreak198x]

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 3
Cyl Count............................... : 128

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 192 Kb
Flash ROM dir reading................... : Ok
SA regions address...................... : by default
SA Translator loading................... : Ok
SA defects assigned..................... : 1

ROM Modules:
ROM version............................. : 58.AAD
ROM F/W version......................... : 005800AA
Overlay F/W version..................... : 58.AAD
Servo F/W version....................... : 01.0L

Heads configuration..................... : by map
Heads number............................ : 3
Heads number in use..................... : 3
Switched off heads...................... : No
Heads map............................... : 0,1,2


OK thx now i found it :=)

but think it's dead...

[Tomset]

http://files.hddguru.com/download/PC-30 ... 959215.rar

[outbreak198x]

Great thx, i booted up set 0 2 2 in RAM MAP - so it spins
loaded LDR, read out modules, reboot, load again 0 2 2 otherwise not possible, loaded my LDR . read out data from h0 nearly 100%, now i've to come near headcrash on 1+2