Use Salvation Mods for PC3K

[Shortscurcuits]

Anyone figured out the module map for Salvation to use mods for PC3k.

Have one Loader works same firmware and want to use these Mods with PC3K PCI to fix a 4R120L0

Post or PM if you can, need data so don't want to experiment with this one.

Thx Andy

[HardDiskBug]

So far, Seagate modules of salvationdata can be used with pc3k (And Vice Verca) and I have created a module conversion table for it too. But haven't experimented on maxtors yet..
If needed about seagates, welcome...

[Shortscurcuits]

Thx HardDiskBug might come in handy if I ever fully figure out Seagates! It would be welcome if you want to PM it.

I'll try to compare the maxtor modules in Winhex and will post a table when done if they work.

Worth a try if I back up first. Was just hoping someone had done this already to save me a few hours headscratching.

Thanks Andy

[bunnydawg]

I"d read somewhere it was just renaming the modules to .rpm

[bunnydawg]

Don't mean to post twice... did you work out a conversion thingy for that yet bug ?

Thanks

Robert