MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
barak
 Post subject: STM3320820A
PostPosted: February 23rd, 2012, 11:01 
Offline
User avatar

Joined: September 1st, 2007, 14:39
Posts: 101
Location: Finland
After head change I get this on my utility:
-----------------------------------------------------------------
Reset
4096k x 16 DRAM
GALAXY - 1_Disk S-6D 09-22-06_15:48
HM SFI
!
$SFI
AMR
(P)PATA Reset
$SFI
AMR
$$$SFI
AMR
$$SFI
AMR
$$$SFI
AMR
DiskAccess ReadSector EC=47 at ffffffff.00.0002
$SFI
AMR
$$$SFI
AMR
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Failure!
DiskAccess ReadSector EC=47 at ffffffff.00.022b
Failed sys sect. write! Nwt Er 00 RdWr 162f6.00.022b
DiskAccess ReadSector EC=47 at ffffffff.00.0080
DiskAccess ReadSector EC=47 at ffffffff.00.0080
Unable To Load Overlay 01|000A

T>

-----------------------------------------------------------------------------------------------


Any ideas, please?

_________________
-------------------------------------------------------------------------------------------
Top
 Profile  
 
pcimage
 Post subject: Re: STM3320820A
PostPosted: February 23rd, 2012, 11:12 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
If you have PC3000 UDMA, there is a procedure to work around this in most cases and I can help you with this (although ACE technical should be doing it) :-)

If you don't have it, then you are stuck I'm afraid :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
barak
 Post subject: Re: STM3320820A
PostPosted: February 23rd, 2012, 12:29 
Offline
User avatar

Joined: September 1st, 2007, 14:39
Posts: 101
Location: Finland
Yes, I do have it. Actually above is from PC3000 terminal. No one from AceLab was available so I turned to this forum.

_________________
-------------------------------------------------------------------------------------------
Top
 Profile  
 
barak
 Post subject: Re: STM3320820A
PostPosted: February 23rd, 2012, 13:10 
Offline
User avatar

Joined: September 1st, 2007, 14:39
Posts: 101
Location: Finland
Ok, I could solve it by myself. Thanks for the tip though.

_________________
-------------------------------------------------------------------------------------------
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group