Hi,

I need loader for WD10EARS-00MVWB1 FW Vers: 00200076

The drive is from family Sadle G6

Heads number in use..................... : 4
Switched off heads...................... : Yes
Heads map............................... : 0,1,5,7
ROM Firmware version.................... : 00200076


Thank you in advance

are you sure about the HM?

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

HM Looks good to me for 1TB Sadle.

Dont have loader for this version, sorry

Switched off heads...................... : Yes

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

here is information in starting utility

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 20.76E
ROM generation.......................... : 20.76E
Link table version...................... : 0B.3B.
Consolidated ROM version................ : 00200076

ROM Modules:
Flash ROM dir reading................... : Ok
Flash ROM dir (ext) reading............. : Ok (Active)
Modules directory address............... : 377 647 (24)
SA regions address...................... : by default
Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 4
Switched off heads...................... : Yes
Heads map............................... : 0,1,5,7
ROM Firmware version.................... : 00200076

Could be refurbished.

Don't have that version either.

_________________
www.datarecoveryne.com

2TB models have head map of 0,1,2,5,6,7 - 6 heads.

As well as 1TB my friend.

I keep a record in my DB for such, and most of mine are 012567

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Do not have that loader either.

Have a healthy WD10EARS-00MVWB0 drive with the following head map:

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1980
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 52.72B
>ROM generation.......................... : 52.72B
>Link table version...................... : 0A.1T.
>Consolidated ROM version................ : 00520072
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Modules directory address............... : FIXED
>SA regions address...................... : by default
>Heads configuration..................... : by map
>Heads number............................ : 6
>Heads number in use..................... : 4
>Switched off heads...................... : Yes
>Heads map............................... : 1,5,6,7
>ROM Firmware version.................... : 00520072
>
>Service area:
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

WD10EARS-00MVWB0 the one u mentioned here HM: 1567 is it Sadle_G6 ?
and sure this is the default HM my dear? with this 771698 ?

thnx

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Sadle G6 with default heads map. Default as in non-modified map, and not as in type of map.

PCB is 2060-771698-002 REV P1 - I guess this is what you were asking about einstein9, right?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Yes thats right

as an example here: >Heads map............................... : 1,5,6,7

i do not think this is the Def. HM, its been changed
as you see here:

>Heads number............................ : 6
>Heads number in use..................... : 4

its clear now for me, my DB records are always ACCURATE heeheh

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

>Heads number............................ : 6
>Heads number in use..................... : 4

This could be a trimmed down 1.5TB or 2.0TB model. It happens.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

All the time, I agree. Manufacturers don't waste platter space. Bummer for DR, though.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1980
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 20.76E
>ROM generation.......................... : 20.77E
>Link table version...................... : 0B.3B.
>Consolidated ROM version................ : 00200076
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Flash ROM dir (ext) reading............. : Ok (Active)
>Modules directory address............... : 377 647 (24)
>Heads configuration..................... : by map
>Heads number............................ : 6
>Heads number in use..................... : 4
>Switched off heads...................... : Yes
>Heads map............................... : 0,1,2,5
>ROM Firmware version.................... : 00200076
>
>Service area:
>SA dir reading.......................... : Ok
>SA Access............................... : Copy 0,Copy 1
>

Mod 11 attached

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Thank you everybody for your information.
Thank you pcimage for your LDR. I will try to use this.

pcimage please, for this issue I need module#32 with same F/W like this module#11.
Could you please give me?
Thank you in advance.