MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
clonecrp
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 10th, 2015, 13:38 
Offline

Joined: July 6th, 2008, 22:41
Posts: 6
Location: USA
Greetings form the Inland Empire is Southern California, USA ... :D

I have been reading posts regarding Mach8er4life's Topic Requesting Information about PC-3000

digitalferret's response is quite impressive (below) but I am not certain it addresses

digitalferret wrote:
PC3000 is industry standard DR gear.

Quote:
is this hardware easy to learn
No

Quote:
will it meet our wants
Yes :) *seriously, what are your "wants".

Quote:
If people using this could provide some useful feature lists


3 Major players if you read thro forum there is plenty of info.

Deepspar : drive imager, can cope with bad sectors and drive instability. relatively "plug in and go" with tweaks. PCI card and portable.

Atola: similar spec, standalone units connect to PC for control. Covers some firmware issues etc.
Similarly built for ease of use.

Ace laboratories: The Daddy. More expensive, not intuitive, limits to licensing some people find un-attractive.
PCI and portable. Needs experienced Tech/Eng to get the best out of it, and likely some form of training.

If you are wanting to "keep the lid on" with regards to DR then Atola / Deepspar would suffice.

Lid off and cover as many bases as possible? Acelabs. (also produce SSD/NAND gear)
"Lid off" will also require a good deal more equipment.

Feature lists?
Why not just give any of the guys a call or drop an email. They all have some form of website and literature, are more than happy to offer pre-sales advice and their standard of English is excellent.


I have examined all of the above products in depth and find that I must say that the Data Recovery business equipment expense is not for the weak at heart. An analogy... I would say without an expensive tire changing machine ... one would find changing automobile tires nearly impossible. Use the right tool for the job !

After attending two (2) different ACE Laboratory Conferences my response is simple .... The ACE PC-3000 (PC3k) Family of equipment covers all data recovery bases ... From simple PATA hard drive recovery through SCSI to RAID and FLASH to SSD's.

Ace Laboratory is a one-stop-shop ....

But there is more ... ACE Tech support is unparalleled in the industry and product software with techniques constantly updated to reflect latest technology updates and procedures.... In-depth training is also available.

I seriously believe there is NOT another organization on this planet that can or has provided the Data Recovery Industry with the quality products, training and technical support necessary to support a Data Recovery Enterprise.

The PC-3000 is the right tool .... I have been using them for years :) and expect to continue ...
Top
 Profile  
 
guru
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 10th, 2015, 17:06 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Wow what an advert!

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
jermy
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 10th, 2015, 18:27 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
why is still written a banned user


Attachments:
banned.JPG
banned.JPG [ 10.56 KiB | Viewed 8637 times ]
Top
 Profile  
 
clonecrp
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 10th, 2015, 19:18 
Offline

Joined: July 6th, 2008, 22:41
Posts: 6
Location: USA
guru wrote:
Wow what an advert!


Gents .... I simply paint what I see :!: .... tried most of the other stuff ...

I think I hit most of the points .... PM me should you desire specifics...

Doug
Top
 Profile  
 
guru
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 11th, 2015, 1:54 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Am I banned again?

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
guru
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 11th, 2015, 1:56 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
I simply mentioned that it's s good advert. Nothing more, nothing less.

We all know PC3000 is the best "Public" hardware/software product...

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
jermy
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 11th, 2015, 3:05 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
guru wrote:
Am I banned again?

no, you don't, but it's still written banned user
Top
 Profile  
 
nitrious
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 11th, 2015, 14:57 
Offline

Joined: April 21st, 2015, 10:22
Posts: 38
Location: South Africa
Ok, so a lot changed on this post while i typed my response : however to the original OP.

if I could provide my newly formed knowledge, similar situation to yours perhaps, being new to this industry. It is however an opinion, please take it as such.

PC-3000 first and best.
Deep-Spa second + R-Studio
MRT-Pro third for the easier stuff that might take up time on the PC-3000 unnecessarily. Will give hassles from time to time. Some feature that doesn't work as expected or HDD (family) not quite supported (fully).
Top
 Profile  
 
nitrious
 Post subject: Re: Requesting Information about PC-3000
PostPosted: May 11th, 2015, 21:34 
Offline

Joined: April 21st, 2015, 10:22
Posts: 38
Location: South Africa
heh, i see the r didn't quite make it in ;) That onsen looks amazing!

http://www.deepspar.com/r-studio-ds-disk-imager.html for anyone that's interested and doesn't already have it.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group