Discussions related to PC-3000
Please no pirated software here!
Post a reply

Re: PC-3000 question

August 12th, 2014, 16:07

"Recovering and restoring" with HDD Regenerator:
viewtopic.php?f=1&t=28780

Re: PC-3000 question

August 12th, 2014, 16:21

fzabkar wrote:BTW, you need a Torx 6 driver in your toolkit. ;-)

Further to that, you will need are T5, T6, & T8 frequently...and others infrequently.

Re: PC-3000 question

August 12th, 2014, 17:03

You make a mistake. Probably you think about HDD Degenerator.

Re: PC-3000 question

August 20th, 2014, 10:46

HDDRegen / Spinrite etc then open it up?

Ready, Fire, Aim! and how premature execution dooms yet another potential Data Recovery.

Diagnostic _must_ precede remedial action.

Want to self teach by experimentation?
Fabulous, but do it on your own devices (spares n repairs from ebay etc), not on a clients.

Re: PC-3000 question

August 21st, 2014, 15:33

If i'm not mistaking this is a wd usb drive. If its only the upper platter that is scratched we could still do a partial recovery with the other layers.
Would give you around 70% of the data (no big files like movies however).

Dobre
Post a reply