| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| firmware needed for ST3750640NS 3AEG S/N:5QD...... http://forum.hddguru.com/viewtopic.php?f=11&t=10554 |
Page 1 of 1 |
| Author: | mulan [ November 25th, 2008, 12:05 ] |
| Post subject: | firmware needed for ST3750640NS 3AEG S/N:5QD...... |
Hello I need the "ata overlay" track for this drive. I have the rest of the tracks ST3750640NS 3AEG S/N:5QD...... Reset 4096k x 32 DRAM GALAXY4D - 1_Disk S-6C 09-01-06_15:33 HM SFI ! (P)SATA Reset Unable To Load Overlay 00|0014 T>Eng Rev = .0G3 Compat/Hardware = .6F1 GALAXY4D - 4_Disk 3.AEG 09-01-06_15:36 AEG,GX_4D_8H_S,4H CERT Rev = .0B5 NONE Mask Rom Rev = S-6C Orig Code = AEG4H1 TONKA2_GX_4H1.0G3.0B5 i have tried different ata tracks from close hdd's butt i don't have the exact mach if anyone have this please share thanks in advance |
|
| Author: | harddrivespecialist [ November 25th, 2008, 15:38 ] |
| Post subject: | Re: firmware needed for ST3750640NS 3AEG S/N:5QD...... |
ATA overlay ) is unique to your drive, so no other overlay will help you. |
|
| Author: | mulan [ November 27th, 2008, 12:18 ] |
| Post subject: | Re: firmware needed for ST3750640NS 3AEG S/N:5QD...... |
it's true that is the first BARACUDA ES that i have to work on, butt i have hard time to believe that the ata overlay track is unique for this drive. it's the first seagate drive with unique ata overlay track? |
|
| Author: | mulan [ December 7th, 2008, 6:10 ] |
| Post subject: | Re: firmware needed for ST3750640NS 3AEG S/N:5QD...... |
nobody can give me this track (ata overlay), just to try to see if it is unique? please! thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|