HDD GURU FORUMS

WD400BB-00jha0
Family:sabre53

Techno mode key:
Tech on................................. : Ok

RAM:
Soft reset ...
Ok

Zone allocation table................... : HDDs RAM reading error Techno CMD sending error Device Error Detected 51/04 (ABR)

Head number reading..................... : Ok
Heads number............................ : 1

ROM:
ROM reading............................. : Ok
Heads configuration..................... : by map
Heads number............................ : 1
Heads number in use..................... : 1
Switched off heads...................... : No
Head map................................ : 0

Service area:
SA dir reading.......................... : SA Dir data reading error
Configuration reading................... : Module 02 not found


Utility status
HDD pameters:
Cylinders number 0
Heads number 1
SA SPT 0

WD400BB is a Caviar16 drive last time I checked...

thatdellguy wrote:WD400BB is a Caviar16 drive last time I checked...

Family:sabre53
Black

WDxxxBB-JHxx is Sabre

This looks like a head problem to me.

pcimage wrote:WDxxxBB-JHxx is Sabre

This looks like a head problem to me.

head is ok
because writer bad other firmware...

Sorry had a momentary brain fart. Did you try a resources track scan of head 0?