HDD GURU FORUMS
http://forum.hddguru.com/

Steps to reload firmware on to a maxtor harddisk
http://forum.hddguru.com/viewtopic.php?f=11&t=10950		 Page 1 of 1
Author:  seeprakash [ January 10th, 2009, 6:09 ]
Post subject:  Steps to reload firmware on to a maxtor harddisk
Hi Gurus,

Could someone brief me the exact steps to reload the firmware on to a maxtor harddisk.

I am really confused with the topic.

I have a PC 3000(ISA) card and the necessary softwares,interfaces.

Of course a bad malfunctioning maxtor 40GB HDD,which gets detected in bios.

But it is not booting and googled the web and it is confirmed that the firmware is to be reloaded.

Prakash
Cheers
Author:  CK [ January 10th, 2009, 8:24 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
I doubt your copy of PC3k is legitimate. But if it is, READ THE MANUAL!
Author:  thatdellguy [ January 10th, 2009, 16:09 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
Start with a cup of sugar.
Measure out 2 1/2 cups of flour.
Fill a big bowl half full with water.
Put pc3kisa card in bowl.
Mix well.
Cook at 458 F for 1 hour.
Take our of oven and let sit for 15 mins.
Take pc3kisa card out and enjoy.
Author:  rameez [ January 10th, 2009, 16:44 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
thatdellguy wrote:
Start with a cup of sugar.
Measure out 2 1/2 cups of flour.
Fill a big bowl half full with water.
Put pc3kisa card in bowl.
Mix well.
Cook at 458 F for 1 hour.
Take our of oven and let sit for 15 mins.
Take pc3kisa card out and enjoy.


You forgot to put the drive ...
Author:  thatdellguy [ January 10th, 2009, 17:21 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
That recipe is secret...
Author:  BlackST [ January 11th, 2009, 12:54 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
The card came with docs. Anyway, you have to know what's malfunctioning FIRST. Need the drive or the data?
Author:  drc [ January 11th, 2009, 23:34 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
If it is recognized fine in the BIOS then you probably don't need to mess with the firmware.
Author:  hddguy [ January 23rd, 2009, 11:40 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
I think we lost him at hello..... :roll:
Author:  seeprakash [ January 25th, 2009, 4:02 ]
Post subject:  Re: Steps to reload firmware on to a maxtor harddisk
Gurus,

Thanks for the replies , I know it is bit tuff,needs experience to under stand the DR problems.
My PC 3000 card , my docs, I will read the docs and learn.

Cheers,
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/