| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| MAXTOR N40P ARDENT LDR Needed http://forum.hddguru.com/viewtopic.php?f=11&t=11000 |
Page 1 of 1 |
| Author: | seeprakash [ January 15th, 2009, 9:26 ] |
| Post subject: | MAXTOR N40P ARDENT LDR Needed |
Gurus, I am looking for the LDR for a MAxtor 40GB Hardisk. Details are as follows: --------------------------------- FW CODE: NAR61HA0 MODEL:6E040L0711233 SERIAL NO:E91QJKJE FACTORY CODE:k,M,B,A PCBA:B8FED DATE 29SEP2004 DIAMOND PLUS 8 ----------------------------- Cheers, |
|
| Author: | dobrevjetser [ January 15th, 2009, 9:51 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
For pci or udma ? I have for udma. Dobre |
|
| Author: | seeprakash [ January 15th, 2009, 10:49 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
Hi Gurus, FYI: I am using PC3000 DOS on Pentium 3 800mhz PC. I just got to know that PC3000 PCI , PC 3000 UDMA windows modules are not compatible with DOS version. Cheers, |
|
| Author: | dobrevjetser [ January 20th, 2009, 4:47 ] | ||
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed | ||
Here you have the modules (udma pcr format). Hope it helps, Dobre
|
|||
| Author: | seeprakash [ January 22nd, 2009, 11:49 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
Dobre My friend, Thanks so much |
|
| Author: | seeprakash [ January 27th, 2009, 0:38 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
Hi All, Does any one as the regular ldr and modules for this perticular model and FW. Thanks, |
|
| Author: | pepe [ January 27th, 2009, 21:43 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
pm me your email. pepe |
|
| Author: | seeprakash [ February 21st, 2009, 12:13 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
Pepe/Dobre, Thanks for your help.I used the ldrs sent to me to solve this case. Cheers, |
|
| Author: | harddrivespecialist [ February 21st, 2009, 14:47 ] |
| Post subject: | Re: MAXTOR N40P ARDENT LDR Needed |
Did you resolve your problem? PC3000 DOS might have a problem with that "chineese firmware" |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|