Page 1 of 1
SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 9:08
by zebong
Hi Anyone can tell-me what i have to do is this terminal error:
- Code:
Reset
4096k x 16 DRAM
VENUS - 1_Disk S-0C 12-12-06_13:23
HM SFI
!
$($01D0C,00E74,0000,00,51,70,01)HM REG701 8B
HM SFI
!
ERR Read App Code
F>
Thanks
ZeBong
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 10:17
by pcimage
Is PCB native?
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 10:29
by dobrevjetser
Probably bad/weak head and perhaps also damage to platters.
Sometimes this drive can still be copied using a loader, but much depends of the state of the heads and platters.
Dobre
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 11:33
by pcimage
Is it a 3.CAE firmware drive?
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 15:34
by zebong
The PCB is the native one.
The drive is: ST9160821AS FW: 3.ALC
I open it and i notice that the heads stop at the middle.
Them it give this in terminal.
- Code:
ERR Read App Code
F>
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 16:35
by pcimage
Probably bad/weak heads then.
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 19:31
by harddrivespecialist
pcimage wrote:Is it a 3.CAE firmware drive?
Do you have a loader with this firmware?
Re: SEAGATE MOMENTUS 5400.3 VENUS
Posted: January 29th, 2009, 21:33
by Doomer
zebong wrote:The PCB is the native one.
Doesn't look native to me