| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| What are the Parameters to look when matching a donor hdd http://forum.hddguru.com/viewtopic.php?f=11&t=11146 |
Page 1 of 1 |
| Author: | seeprakash [ January 29th, 2009, 14:38 ] |
| Post subject: | What are the Parameters to look when matching a donor hdd |
Hi Gurus, Could someone put some light on what are the parameters that needs to matched for a donor harddrive. MODEL,CODE,PCBA...etc. If we dont get exact model+code+PCBA how can we proceed or what could be the nearest LDR that can be loaded. After we load a ldr, is it that that the max lba should match the disk which has prob. or say per example when we replace : PN == 18 0029 0139 û û û AT_PDL 1 AT_PDL - P-List When we regenerate the Transtable does it afffect or cause wrong shifting. |
|
| Author: | thatdellguy [ January 29th, 2009, 21:12 ] |
| Post subject: | Re: What are the Parameters to look when matching a donor hdd |
Use the forum search feature... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|