Attachment:
WD200BB.jpg [ 84.71 KiB | Viewed 16720 times ]
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD200BB http://forum.hddguru.com/viewtopic.php?f=11&t=11617 |
Page 1 of 2 |
| Author: | zebong [ March 16th, 2009, 18:10 ] |
| Post subject: | WD200BB |
Hi to all, Have this disk that dont spin, so i found a match and change PCB but did not give the disk ID, but will get DRD DSC. So i resolde the ROM from patient to donor. Now the donor PCB dont spin with the ROM from patient, and also the patient PCB with the ROM from donor also dont spin. It looks like the ROM has been bad resolder so i check it and it looks OK. So i found other PCB change it and the disk SPIN but the ID is not correct. What can be happening here ? Thanks ZeBong |
|
| Author: | zebong [ March 16th, 2009, 18:36 ] |
| Post subject: | Re: WD200BB |
Attachment: WD200BB.jpg [ 84.71 KiB | Viewed 16720 times ] |
|
| Author: | harddrivespecialist [ March 16th, 2009, 19:09 ] |
| Post subject: | Re: WD200BB |
ROM could be corrupted. |
|
| Author: | zebong [ March 16th, 2009, 19:15 ] |
| Post subject: | Re: WD200BB |
harddrivespecialist wrote: ROM could be corrupted. This family dont have option to rebuild the ROM from SA ? Can anyone tell-me the defaul off the headmaps for this drive Wich heads are working ? Heads configuration..................... : Default Thanks ZeBong |
|
| Author: | harddrivespecialist [ March 16th, 2009, 22:00 ] |
| Post subject: | Re: WD200BB |
Your head count is 1. Provide a full model number. With one head it should be easy to change. Probably your head is bad and it should not be difficult to change. |
|
| Author: | zebong [ March 17th, 2009, 6:55 ] |
| Post subject: | Re: WD200BB |
Hi, The full model is : WD200BB-00AUA1 01 DEC 2000 PCB: Patient :0000 001003-001 A Donor : 0000 001003-000 C When i enter with the donor disk i have this: ( head map) one head in use, but dont know wich is. Attachment: wd200bb-01.JPG [ 74.15 KiB | Viewed 16718 times ] The patient disk with the donor pcb i have this: Attachment: wd200bb-02.JPG [ 77.55 KiB | Viewed 16716 times ] Thanks ZeBong |
|
| Author: | pcimage [ March 17th, 2009, 18:02 ] |
| Post subject: | Re: WD200BB |
All you need to do is download the correct ROM to the donor PCB. Or find a PCB from a drive of the same model number WD200BB-xxAUA1. Your donor PCB is not compatible as it stands. |
|
| Author: | zebong [ March 17th, 2009, 18:26 ] |
| Post subject: | Re: WD200BB |
Thanks Sean, Will try that tomorow morning. |
|
| Author: | zebong [ March 18th, 2009, 7:22 ] |
| Post subject: | Re: WD200BB |
Hi, Need a ROM for this model WD200BB-00AUA1 Anyone have this Thanks ZeBong |
|
| Author: | zebong [ March 19th, 2009, 13:30 ] |
| Post subject: | Re: WD200BB |
No one have this ROM ? |
|
| Author: | harddrivespecialist [ March 19th, 2009, 13:39 ] |
| Post subject: | Re: WD200BB |
pm me with your email |
|
| Author: | Mikippp [ March 19th, 2009, 15:45 ] |
| Post subject: | Re: WD200BB |
Hi, WD200BB-60AUA1 Mikippp |
|
| Author: | zebong [ March 20th, 2009, 11:54 ] |
| Post subject: | Re: WD200BB |
THanks all, will test it now. |
|
| Author: | zebong [ March 20th, 2009, 12:35 ] |
| Post subject: | Re: WD200BB |
Hi, Test all the ROm but did not get the correct size. The version off the ROM are different Attachment: WD200BB-XXAUA1-ROM.JPG [ 31.52 KiB | Viewed 16708 times ] Mikippp, your ROM give-me this Writing ROM from file................... : <HDD Profile>\Data\ROM\WDC.18.11--ROM_1809D_25_2022_WD200BB-60AUA1.bin ROM writing error (ROM data checking) Also i have other ROM in the database with the same error, but it looks like a close match off my disk. Writing ROM from database............... : /Caviar Cyl 16 bit/WDC WD200BB-00AUA1 18.20D18 WD-WMA6Y1883452/ROM ROM writing error (ROM data checking) the version looks like the 18.20D Any hint here? Thanks ZeBong |
|
| Author: | Mikippp [ March 20th, 2009, 13:04 ] |
| Post subject: | Re: WD200BB |
Hi, Are U sure that on PCB is installed flash M29F102 ... not eprom 27C1024 ... Mikippp |
|
| Author: | N.C. [ March 20th, 2009, 13:29 ] |
| Post subject: | Re: WD200BB |
In this family i have seen some times OTP PROM chip for the rom image. And as we expect, yes, it can be damaged. :S Janos |
|
| Author: | zebong [ March 20th, 2009, 13:30 ] |
| Post subject: | Re: WD200BB |
Mikippp wrote: Hi, Are U sure that on PCB is installed flash M29F102 ... not eprom 27C1024 ... Mikippp Hi, The PCB from client it have the eprom AT27C1024 Donor PCB it have the flash M29F102BB I have to found a PCB with the "AT27C1024" eprom ? Thanks ZeBong |
|
| Author: | rameez [ March 23rd, 2009, 5:45 ] |
| Post subject: | Re: WD200BB |
I also get this error while writing ROM : ROM writing error (ROM data checking) Any one know why this happens ? |
|
| Author: | zebong [ March 25th, 2009, 7:56 ] |
| Post subject: | Re: WD200BB |
Hi Again, need some help here. i found other donor disk, i try hot swap and it start clicking. i try the PCB again in the patiente disk and the same problem. Now the disk that i have found as a donor, it have 15 days different.... it should work .... this model dont have too much adaptive info. The different that i see from patiente disk, from the donor disk´s that i try in the ROM chip the patiente disk have the eprom AT27C1024 and the donor disk have the flash M29F102BB Attachment: WD200BB-00AUA1.jpg [ 774.24 KiB | Viewed 16719 times ] Any comments are welcome. |
|
| Author: | zebong [ March 25th, 2009, 14:29 ] |
| Post subject: | Re: WD200BB |
eprom AT27C1024 Attachment: ATMEL.jpg [ 9.21 KiB | Viewed 16931 times ] |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|