| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Barracuda 7200.11 Busy Fix http://forum.hddguru.com/viewtopic.php?f=11&t=12439 |
Page 1 of 1 |
| Author: | dabihsss [ June 6th, 2009, 8:01 ] |
| Post subject: | Barracuda 7200.11 Busy Fix |
Hello All, Can anyone help me to fix 7200.11 busy fix and 0lba in pc3000pci. Thank you |
|
| Author: | dabihsss [ June 6th, 2009, 11:21 ] |
| Post subject: | Re: Barracuda 7200.11 Busy Fix |
i tied it but i cant see anything from console, there are no problems with connectivity as hyperterminal is able to read another seagate hard drive. any one please help me to fix it, pcb becomes ready in pc3000 after disconnecting spindle motor. |
|
| Author: | dabihsss [ June 7th, 2009, 0:47 ] |
| Post subject: | Re: Barracuda 7200.11 Busy Fix |
which are the pins to short in read channel ? |
|
| Author: | rameez [ June 7th, 2009, 10:18 ] |
| Post subject: | Re: Barracuda 7200.11 Busy Fix |
Did you read the manual that comes with it ? |
|
| Author: | Creator [ June 7th, 2009, 11:47 ] |
| Post subject: | Re: Barracuda 7200.11 Busy Fix |
In the PC3k UDMA it is very easy to fix 0 LBA problem, just by one click solution. But hard to do in the PCI version. |
|
| Author: | dabihsss [ June 7th, 2009, 14:46 ] |
| Post subject: | Re: Barracuda 7200.11 Busy Fix |
i dont have a manual for f3 Architecture, can anyone please help me to find the read channel pins to short as it is not detecting in terminal , but pcb shows ready after detaching from spindle in pc3000pci. i tried using the manual method with hyperterminal, but i am not getting console even after connecting pcb seperated from hddcase. |
|
| Author: | lcoughey [ June 8th, 2009, 8:55 ] |
| Post subject: | Re: Barracuda 7200.11 Busy Fix |
dabihsss wrote: i dont have a manual for f3 Architecture, can anyone please help me to find the read channel pins to short as it is not detecting in terminal , but pcb shows ready after detaching from spindle in pc3000pci. i tried using the manual method with hyperterminal, but i am not getting console even after connecting pcb seperated from hddcase. If you own a legit copy of PC3000, contact them for tech support. I'm sure that they will happily talk you through the process. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|