It cames the RAID from Acelabs
Let´s wait and see, what they have make for this.Data Extractor Raid Edition provides the creation of virtual RAID raid array inside Data Extractor task.
You can recover RAID 0, RAID 1, RAID 4, RAID 5. Mainly Data Extractor software is targeted to recover data from damaged RAID array drive (with bad sectors, surface/head stack problems, "hot-swapped" drives etc).
As one of that virtual RAID array disk, common Data Extractor task disk can be used. When accessing the sectors on disk, all possibilities of Data Extractor and PC-3000 are used (like data imaging, work in techno mode, power-supply control, resets, sector "jumps", usage of map reading, catalog/file map reading, heads map mode and explorer mode etc.)
The HDDs, disk partitions and regions connected in common way could be used as the other virtual RAID disks. It is also possible to use disk image file or usual drive that is connected to ATA1 PORT on PC-3000 UDMA board.
For RAID 5 and RAID 4 it is possible to recover the data without one drive.
It is not necessary to image all the data from RAID and damaged drive in the cases when only one drive is damaged. Since this situation is quite rife, this ability helps to recover the data much more effectively than any other tool in the world.
After the testing procedures are completed,
this new products will be available for our users.
I am curios how it will work with 3 disk, from a Raid 5 ....