HDD GURU FORUMS
http://forum.hddguru.com/

PC3000 UDMA - IDE Ribbon Cable
http://forum.hddguru.com/viewtopic.php?f=11&t=12832
Page 1 of 1

Author:  TerraNova [ July 26th, 2009, 6:54 ]
Post subject:  PC3000 UDMA - IDE Ribbon Cable

Does anyone know where to get the IDE Cable that comes with PC3000 UDMA, I like it because its robustness and the cable is not stiff and very flexible.

Author:  lcoughey [ July 27th, 2009, 15:39 ]
Post subject:  Re: PC3000 UDMA - IDE Ribbon Cable

Did you try contacting ACE? It is possible that they custom made the cables, just to give the extended length.

Author:  hddguy [ July 27th, 2009, 15:41 ]
Post subject:  Re: PC3000 UDMA - IDE Ribbon Cable

I have contacted Ace on a few occasions where I need replacement parts such as adaptors and cables, and I am pretty sure you can purchase extras from them

Author:  harddrivespecialist [ July 28th, 2009, 0:37 ]
Post subject:  Re: PC3000 UDMA - IDE Ribbon Cable

You can make few for yourself, just get a hold of the cable.

Author:  HDD Pig [ July 28th, 2009, 8:31 ]
Post subject:  Re: PC3000 UDMA - IDE Ribbon Cable

i have a problem with my HD ..because it not detect the data...when i put in my computer i hear sound like the magnetic "tick" ...so how to recovery data from my hard disk broken ... does PC3000UDMA solve this problem for me? Thx!

Author:  pepe [ July 28th, 2009, 19:24 ]
Post subject:  Re: PC3000 UDMA - IDE Ribbon Cable

Hi

Pc3000UDMA won't solve the issue for you.
An expert tool requires expert knowledge to work with.
The very basic thing in DR is proper diagnostics, so if u need your data back you'd be better have a pro look at it.


pepe

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/