ST980011A - 80gb pata

[zebong]

Hi to all,

Have this in a seagate disk


Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M-21 11-25-03 18:53
Head Mask FFFF - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>




Anyone can give an opinion what can i do here,


Thanks
ZeBong

[pepe]

Somebody swapped the pcb and forgot to swap it back...

[hddguy]

You need either the original PCB or its ROM, or as I believe there is no adaptive information on old Seagates, so you could get lucky with an exact matching PCB with same ROM.

Personally, best bet is to ask for native PCB.

[rameez]

What is the firmware on drive ?

[zebong]

Thanks,


Yes i know i will get lucky in find the same PCB, but i have almost 12 all different from this one.


The FW is 3.06.

[rameez]

You need pcb with M14 code .

[zebong]

You need pcb with M14 code .

Hi, yes i think i try that one and did not work the same appear in terminal.

i will try it and post here the logs in terminal.

[rameez]

Try S15 also .

[scratchy]

Or you could load the existing ROM with correct ROM from another drive or resource file.

[zebong]

Thanks to all,

Patient is : 100282774 F 6514GSAY

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M-21 11-25-03 18:53

Buzz - Head Mask FFFF - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>


i try this one 100282774 C 64119VMM

i have this in terminal

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Head Mask 0000 - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>


Them i try this one : 100282774 E 343247AX

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Head Mask 0000 - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>

LAST ONE : 100282774 E 3425YQ6M

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 0000 - Switch to full int.
Spin Ready
Application code incompatible with serial flash code

F>


and i dont have a loader for the M-21

[zebong]

THANKS

S-15 SOLVE