| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Help with fixing WD1600BB FW http://forum.hddguru.com/viewtopic.php?f=11&t=13708 |
Page 1 of 1 |
| Author: | hddnb [ October 21st, 2009, 17:55 ] |
| Post subject: | Help with fixing WD1600BB FW |
Hi Gurus, I have a WDC WD1600BB-00RDA0 with FW problems. SA surface verification gave out the bad error on cly: -1, -8, -9 and -10 and on both heads. Those correspond to Translator (Module 32), SMART (22), SMART (21), and G-List (34) respectively. I am new on PC3000 UDMA and I would appreciate your suggestions on the next steps for data recovery. Thanks. |
|
| Author: | pepe [ October 26th, 2009, 23:24 ] |
| Post subject: | Re: Help with fixing WD1600BB FW |
U can get support from ACE or deepspar whicever you bought your tools. Ask them first. pepe |
|
| Author: | hddnb [ October 27th, 2009, 9:53 ] |
| Post subject: | Re: Help with fixing WD1600BB FW |
Thanks, Pepe. I figured out and fixed the translator and got the data out. |
|
| Author: | pepe [ October 28th, 2009, 18:13 ] |
| Post subject: | Re: Help with fixing WD1600BB FW |
great. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|