Hi

I am having problems imaging using DDI. THe DDI can detect both source
and destination drives. But when Start Imaging I see Initializing LBA
Map followed by Timeout while waiting for DMA to write sectors. I
suspected some problem with destination drive. I replaced with
different destination drives, all came up with same error.

Anyone came across this problem before?. DDI Imaging settings are
default.

Thank You

Cheers
-Jag

I suggest you post your question on the DeepSpar forums. They are usually fast at responding and they'd be the best people to answer your questions.

_________________
Luke
Recovery Force Data Recovery

Strange error...

_________________
Vitaliy Mokosiy
CTO, Atola Technology

Are you using the supplied/recommended mainboard?

And also the modified IDE cable?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!