HDD GURU FORUMS

Hi

I am having problems imaging using DDI. THe DDI can detect both source
and destination drives. But when Start Imaging I see Initializing LBA
Map followed by Timeout while waiting for DMA to write sectors. I
suspected some problem with destination drive. I replaced with
different destination drives, all came up with same error.

Anyone came across this problem before?. DDI Imaging settings are
default.

Thank You

Cheers
-Jag

I suggest you post your question on the DeepSpar forums. They are usually fast at responding and they'd be the best people to answer your questions.

Strange error...

Are you using the supplied/recommended mainboard?

And also the modified IDE cable?