Deepspar Disk Imager - Timeout while waiting for DMA to writ

[jag17]

Hi

I am having problems imaging using DDI. THe DDI can detect both source
and destination drives. But when Start Imaging I see Initializing LBA
Map followed by Timeout while waiting for DMA to write sectors. I
suspected some problem with destination drive. I replaced with
different destination drives, all came up with same error.

Anyone came across this problem before?. DDI Imaging settings are
default.

Thank You

Cheers
-Jag

[lcoughey]

I suggest you post your question on the DeepSpar forums. They are usually fast at responding and they'd be the best people to answer your questions.

[Vitaliy Mokosiy]

Strange error...

[pcimage]

Are you using the supplied/recommended mainboard?

And also the modified IDE cable?