| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Data Extractor LBA Map Error Codes http://forum.hddguru.com/viewtopic.php?f=11&t=13938 |
Page 1 of 1 |
| Author: | toast [ November 15th, 2009, 22:27 ] |
| Post subject: | Data Extractor LBA Map Error Codes |
Does anyone know what the codes in the DE LBA Map file mean? so far I have the following 0xF1 Sector was read successfully Sector was read with an ECC error Sector has been read without CRC control An error prevented sector reading 0xF3 Sector was skipped during scanning 0xF6 Sector was not read because of readiness loss Sector has been modified 0XF0 Unprocessed these are for the UDMA version. the codes for the PCI version are different. any help filling in the blanks would be greatly appreciated. thanks |
|
| Author: | toast [ November 15th, 2009, 23:41 ] |
| Post subject: | Re: Data Extractor LBA Map Error Codes |
I found them. opened up a DE map and just put in hex values 0xF0 - 0xFF. don't know why i didn't think of that before. all error codes are as follows: f1 - Sector was read successfully f4 - Sector was read with an ECC error f5 - Sector has been read without CRC control f2 - An error prevented sector reading f3 - Sector was skipped during scanning f6 - Sector was not read because of readiness loss f7 - Sector has been modified f0 - Unprocessed F9 - FF displayed empty white boxes like an Unprocessed sector. F8 didn't even display a box, which was strange. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|