| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| MHZ2250BH Kernel mode? http://forum.hddguru.com/viewtopic.php?f=11&t=14770 |
Page 1 of 1 |
| Author: | DataWreck [ February 7th, 2010, 17:32 ] |
| Post subject: | MHZ2250BH Kernel mode? |
Hi Folks Is there any support for the MHZ2250BH or any way to force the PCB into Kernel mode for ROM reading? No external ROM on these boards *Sorry I did post on the Ace forums but this board has a lot more traffic* Thanks Leigh |
|
| Author: | pcimage [ February 9th, 2010, 15:25 ] |
| Post subject: | Re: MHZ2250BH Kernel mode? |
I presume you have a duff PCB? I have had a few like this and had to search high & low for a compatible PCB and in most cases found one. Post the pic of the drive label and I'll see if I have one. |
|
| Author: | DataWreck [ February 10th, 2010, 7:56 ] | ||
| Post subject: | Re: MHZ2250BH Kernel mode? | ||
Yep your correct the PCB is not playing ball. Label below Cheers mate Leigh
|
|||
| Author: | TerraNova [ February 11th, 2010, 21:09 ] |
| Post subject: | Re: MHZ2250BH Kernel mode? |
Hint: Short circut and you will get kernel |
|
| Author: | book14 [ February 21st, 2010, 12:33 ] |
| Post subject: | Re: MHZ2250BH Kernel mode? |
have you replaced the fuse? to test the item with the symbol "N" |
|
| Author: | tecol [ January 28th, 2011, 15:45 ] |
| Post subject: | Re: MHZ2250BH Kernel mode? |
Any success? Have an identical disc, same rev.nr. It spins and i can hear the head moving. Need another pcb or any other ideas? |
|
| Author: | DataWreck [ January 31st, 2011, 17:20 ] |
| Post subject: | Re: MHZ2250BH Kernel mode? |
While I remember that job being sorted we'll have to dig through the case notes. Will PM if found |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|