HDD GURU FORUMS
http://forum.hddguru.com/

i need help to use pc3000 udma
http://forum.hddguru.com/viewtopic.php?f=11&t=15007		 Page 1 of 2
Author:  ashrafatteya2005 [ March 2nd, 2010, 22:03 ]
Post subject:  i need help to use pc3000 udma
i need some files plz frome any one need to help
Author:  rameez [ March 3rd, 2010, 1:02 ]
Post subject:  Re: i need help to use pc3000 udma
If you have legit copy Ace will help you .
Author:  poehere [ March 3rd, 2010, 2:02 ]
Post subject:  Re: i need help to use pc3000 udma
Go to TS and set up your download box - then download them like we all did
Author:  ashrafatteya2005 [ March 3rd, 2010, 19:02 ]
Post subject:  Re: i need help to use pc3000 udma
my new pc3000 udma is a gift and i have no software for it it was only work on th hard disk but now the antivirus delete it so i ask for heeeeeeeeeeeeelp plz
Author:  zebong [ March 3rd, 2010, 19:15 ]
Post subject:  Re: i need help to use pc3000 udma
them you have a problem there.

your card have a lot of protection if you try to install a version that your card are not in the acelabs database i think your card will be blocked.

So is better to ask the person who give it to you for that.

it sound strange people giving UDMA

what is your card number ?
Author:  CK [ March 3rd, 2010, 19:49 ]
Post subject:  Re: i need help to use pc3000 udma
A gift eh? You must have nice friends.
Author:  thatdellguy [ March 3rd, 2010, 19:54 ]
Post subject:  Re: i need help to use pc3000 udma
This has got to be the saddest attempt to obtain software that I have ever seen. I'm surprised your all giving this a second of your day. :roll:
Author:  pcimage [ March 5th, 2010, 4:07 ]
Post subject:  Re: i need help to use pc3000 udma
ashrafatteya2005 wrote:
my new pc3000 udma is a gift and i have no software for it it was only work on th hard disk but now the antivirus delete it so i ask for heeeeeeeeeeeeelp plz


Cojones.

Almost as good as "please sir, my dog ate my original manual"
Author:  drc [ March 5th, 2010, 10:31 ]
Post subject:  Re: i need help to use pc3000 udma
pcimage wrote:
Almost as good as "please sir, my dog ate my original manual"

I forget, was that this guy or a different guy?
Author:  tonibkassab [ March 20th, 2010, 9:59 ]
Post subject:  Re: i need help to use pc3000 udma
I tested the pc3000 at data recovery company, it is not worse to buy.... I prefer the Salvation Data material, cheaper, and with no doubt lottttttttttttttt better... so my friend, forget about the gift you got
and contact Salvation Data their material is up to date and their support is very friendly and better, with no jokes and ironic comments... thanks
Author:  zebong [ March 20th, 2010, 11:47 ]
Post subject:  Re: i need help to use pc3000 udma
tonibkassab wrote:
I tested the pc3000 at data recovery company, it is not worse to buy.... I prefer the Salvation Data material, cheaper, and with no doubt lottttttttttttttt better... so my friend, forget about the gift you got
and contact Salvation Data their material is up to date and their support is very friendly and better, with no jokes and ironic comments... thanks



sorry but dont agree with you.
Author:  pcimage [ March 20th, 2010, 13:32 ]
Post subject:  Re: i need help to use pc3000 udma
nor do I
Author:  thatdellguy [ March 20th, 2010, 15:12 ]
Post subject:  Re: i need help to use pc3000 udma
Tonibkassab, I guess it’s easy to praise SD when you work for them. :lol:
Author:  tonibkassab [ March 21st, 2010, 18:10 ]
Post subject:  Re: i need help to use pc3000 udma
thatdellguy wrote:
Tonibkassab, I guess it’s easy to praise SD when you work for them. :lol:


I don´t work for salvation data nor for pc3000 , I joined this forum looking for professional experience , and all I get is a bunch of amateurs... by the way do you know anything about pcb repair? thank you
Author:  fzabkar [ March 21st, 2010, 21:56 ]
Post subject:  Re: i need help to use pc3000 udma
tonibkassab wrote:
thatdellguy wrote:
I joined this forum looking for professional experience , and all I get is a bunch of amateurs... by the way do you know anything about pcb repair? thank you


My impression is that most "gurus" wouldn't pass Electronics 101. ISTM that most have a software background, if any at all.

PCB repair is a lost art, like blacksmithing, or pyramid building. In future all "technicians" will be board jockeys.
Author:  unknown [ March 22nd, 2010, 2:35 ]
Post subject:  Re: i need help to use pc3000 udma
tonibkassab wrote:
PCB repair is a lost art, like blacksmithing,


Agree with you Mr.fzabkar

tonibkassab wrote:
or pyramid building


Don't Agree, because pyramids building more advanced than the H.D.D's tech. itself,
It's still a big mystery. :)
Author:  tonibkassab [ March 22nd, 2010, 8:34 ]
Post subject:  Re: i need help to use pc3000 udma
:D looking for advanced information in this forum is a waste of time :D Thank you anyway Guys :D
Author:  tonibkassab [ March 22nd, 2010, 8:34 ]
Post subject:  Re: i need help to use pc3000 udma
I don´t work for salvation data nor for pc3000 , I joined this forum looking for professional experience , and all I get is a bunch of amateurs... by the way do you know anything about pcb repair? thank you[/quote]
Author:  tonibkassab [ March 22nd, 2010, 8:37 ]
Post subject:  Re: i need help to use pc3000 udma
PCB repairing sometimes is faster and easier way. unfortunately to someones you should have experience in SMD componentes soldering and electronics. it is a good advice to get some lessons. I already fixed many Samsung and Maxtor HDD only replacing a burnt component... Thank you Guys.
Author:  tonibkassab [ March 22nd, 2010, 8:38 ]
Post subject:  Re: i need help to use pc3000 udma
PCB repair sometimes is the only way to fix a HDD
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/