| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| STM3250310AS http://forum.hddguru.com/viewtopic.php?f=11&t=16111 |
Page 1 of 1 |
| Author: | sempre [ June 16th, 2010, 15:13 ] | |||
| Post subject: | STM3250310AS | |||
Hi to all!  Platter head1 bad => look picture 1)I know some models have both physical and non-functional head of manufacturing, this case can exist such a possibility? 2)Is to make the img platter good (head0) and to remove certain files? Thanks advanced!
|
||||
| Author: | CK [ June 16th, 2010, 16:03 ] |
| Post subject: | Re: STM3250310AS |
Based on the damage, I would say no. The drive environment is badly contaminated with dust. |
|
| Author: | swersig [ June 17th, 2010, 7:33 ] |
| Post subject: | Re: STM3250310AS |
not sure if it is based on seagate's .10 or .11. if it is .10 and platter 0 is also damaged like this your sa is destroyed. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|