Thanks for checking. Customer threw away his original PCB.
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Need NVRAM for HDS721010KLA330, v. GKAOC80A http://forum.hddguru.com/viewtopic.php?f=11&t=16560 |
Page 1 of 1 |
| Author: | drc [ August 2nd, 2010, 12:16 ] |
| Post subject: | Need NVRAM for HDS721010KLA330, v. GKAOC80A |
Hi folks. I need an NVRAM for a Hitachi HDS721010KLA330, with NVRAM version GKAOC80A. Note that this is not the same thing as the f/w version that PC-3K shows when it inits the drive, but the version string that is located at the beginning of the actual NVRAM (after E2PR). Also need the ROM that goes with this NVRAM. Thanks. |
|
| Author: | harddrivespecialist [ August 2nd, 2010, 21:05 ] |
| Post subject: | Re: Need NVRAM for HDS721010KLA330, v. GKAOC80A |
Sorry, checked, but don't have any. |
|
| Author: | drc [ August 4th, 2010, 9:19 ] |
| Post subject: | Re: Need NVRAM for HDS721010KLA330, v. GKAOC80A |
Thanks for checking. Customer threw away his original PCB.
|
|
| Author: | harddrivespecialist [ August 4th, 2010, 9:42 ] |
| Post subject: | Re: Need NVRAM for HDS721010KLA330, v. GKAOC80A |
drc wrote: Thanks for checking. Customer threw away his original PCB. 1/2 of the time, customer does not trow it away, but afraid to show you what he did with it..... Good luck anyways 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|