| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Seagate 80GB S.15 PCB needed! http://forum.hddguru.com/viewtopic.php?f=11&t=16873 |
Page 1 of 1 |
| Author: | hddnb [ August 31st, 2010, 16:52 ] |
| Post subject: | Seagate 80GB S.15 PCB needed! |
Hi All, I am looking for a PCB to match the following HDD: Seagate Barracuda 7200.7 80 GB Model: ST380011A P/N: 9w2003-032 Configuration: DZT-04 FW: 3.16 Date Code: 04023 Site Code: AMK The Terminal output: Appine-1 Disk S.15 01-16-03 11:51 I tried three PCBs, all with terminal info: Application code incompatible with serial flash code. Any info and ideas will be welcome. Thanks |
|
| Author: | rameez [ September 16th, 2010, 13:26 ] |
| Post subject: | Re: Seagate 80GB S.15 PCB needed! |
You can change the firmware to make it compatible with your pcb . |
|
| Author: | fzabkar [ September 16th, 2010, 14:33 ] |
| Post subject: | Re: Seagate 80GB S.15 PCB needed! |
If you upload a detailed photo, someone will identify the serial flash chip for you, assuming it is external to the MCU. |
|
| Author: | rameez [ September 26th, 2010, 6:47 ] |
| Post subject: | Re: Seagate 80GB S.15 PCB needed! |
This pcb has an external ROM , but if u have the tools it is possible to use M14 or M21 pcb on this drive . |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|