| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Anyone had PC3000 training by DeepSpar? http://forum.hddguru.com/viewtopic.php?f=11&t=17680 |
Page 1 of 1 |
| Author: | Agent [ November 16th, 2010, 13:13 ] |
| Post subject: | Anyone had PC3000 training by DeepSpar? |
Just curious if anyone has been though their training, and if so, what did you think? I have read a lot of not so good posts about SD trainings, but not much on DeepSpar / PC3000 ones. Thanks guys. |
|
| Author: | einstein9 [ November 17th, 2010, 5:42 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
i learned before buying my pc3k that all video tutorials are useless really, and will not guide you through the learning. the best is get the tools and start practicing or have your training with Pro. i have plenty of video`s more than 30gb for both sd tools & pc3k but none was helpful sometimes you face same cases but different working scenario If you think watching those video`s will help, then trust me my friend, ur Wrong, totally wrong. pc3k is not like one click and ur done, and there is no step-by-step issues on DR get the tools, practice, have some training and thats it my advice 2 u |
|
| Author: | lcoughey [ November 17th, 2010, 9:16 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
I believe the OP was actually referring to the physical training, held by DeepSpar in Ottawa. I've never gone to the training, but have met the guys there, as well as communicate with them frequently and am confident that it is worth every penny spent. |
|
| Author: | Agent [ November 17th, 2010, 12:27 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
Thanks both of you. I was actually talking about the in-person, physical training offered by DeepSpar. Based on all of my research, it definately seemed like it would give its bang for the buck, obviously not replacing use or expirementation, but still a good start with the equipment. |
|
| Author: | CK [ November 17th, 2010, 18:25 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
I did it back in the days of PC3K ISA and travelled quite some distance to do it. I found it very worthwhile. Andrei knows his stuff and it helped me get a lot out of PC3K. Nothing beats learning yourself, but it pointed me in the right direction. |
|
| Author: | einstein9 [ November 18th, 2010, 7:05 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
CK wrote: I did it back in the days of PC3K ISA and travelled quite some distance to do it. I found it very worthwhile. Andrei knows his stuff and it helped me get a lot out of PC3K. Nothing beats learning yourself, but it pointed me in the right direction. agree with you, i remember the 1st. 2 months i spent reading all of Acelab manuals and some others also, but i became more on knowing their tools after 5 days training with one of the guys here on the forum, was like 16h/day started with PCB repair 1st. then pc3k + SD tools now i can feel the big difference between before/after 5 days training but suggest to read all manuals 1st. and understand them very well, so that u dont ask stupid questions as i used to do on the beginning. wish u good luck |
|
| Author: | Agent [ November 18th, 2010, 15:56 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
That is the plan Einstein, we are looking the get the equipment a few months before the training as it will take a bit of time to get them down here with their schedules. |
|
| Author: | SALIM [ November 28th, 2010, 14:41 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
hello sir pls give me your email. please |
|
| Author: | einstein9 [ November 29th, 2010, 6:08 ] |
| Post subject: | Re: Anyone had PC3000 training by DeepSpar? |
SALIM wrote: hello sir pls give me your email. please REF. to whom? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|