| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Hitachi HDP725050GLA380 Firmware http://forum.hddguru.com/viewtopic.php?f=11&t=20119 |
Page 1 of 1 |
| Author: | marklee [ July 26th, 2011, 11:12 ] |
| Post subject: | Hitachi HDP725050GLA380 Firmware |
Hello all, Does anyone have the firmware modules for the following drive, so that I can re-flash it with my PC-3000. Hitachi Deskstar Model: HDP725050GLA380 MLC: BA2727 P/N: 0A36918 0A36918BA27270C85 The PCB has the code: 0A29738 BA2631 ZzK818 018G on the QR Sticker. I've had a look on the files list here, but there is only the HDP...360 listed. Many thanks, Mark |
|
| Author: | drc [ July 26th, 2011, 13:35 ] |
| Post subject: | Re: Hitachi HDP725050GLA380 Firmware |
What is wrong with the drive? |
|
| Author: | marklee [ July 27th, 2011, 5:31 ] |
| Post subject: | Re: Hitachi HDP725050GLA380 Firmware |
Hello, I have 2 Hitachi hard drives, both with a similar problem. They power up, but I have the click of death on both of them. The SA area isn't been read, so they do not show on my Deepspar FDI, PC3000 or TD1. I have attached it to my Atola Insight, and after it Auto Diagnostic it says there is a problem with the 5V consumption. I have tested the TVR Diodes, but they are both transmitting 12 & 5V as they should. I wanted the firmware so I could attach the PCB to my PC3000 and reflash it to see if it fixes it. If this doesn't work, I was going to try and find donor drives. Can you offer any help/advice? Many thanks, Mark |
|
| Author: | drc [ July 27th, 2011, 9:05 ] |
| Post subject: | Re: Hitachi HDP725050GLA380 Firmware |
See other thread |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|