| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Error terminal http://forum.hddguru.com/viewtopic.php?f=11&t=20228 |
Page 1 of 1 |
| Author: | sempre [ August 9th, 2011, 15:38 ] |
| Post subject: | Error terminal |
Rst 0x20M ASCII Diag mode F3 T>/2 F3 2>Z ExecuteSpinRequest HighPowerMode = 0100 DiagError 00006002 F3 2>U ExecuteSpinRequest Spin Up Complete Elapsed Time 6.556 secs F3 2>/1 F3 1>N1 Failed to load overlay 00000004 LED:000000CC FAddr:0028540B LED:000000CC FAddr:0028540B LED:000000CC FAddr:0028540B |
|
| Author: | einstein9 [ August 9th, 2011, 16:16 ] |
| Post subject: | Re: Error terminal |
Quote: F3 1>N1 Failed to load overlay 00000004 LED:000000CC FAddr:0028540B find the 2 points and try it |
|
| Author: | hddguy [ August 19th, 2011, 11:44 ] |
| Post subject: | Re: Error terminal |
sempre wrote: Rst 0x20M ASCII Diag mode F3 T>/2 F3 2>Z ExecuteSpinRequest HighPowerMode = 0100 DiagError 00006002 F3 2>U ExecuteSpinRequest Spin Up Complete Elapsed Time 6.556 secs F3 2>/1 F3 1>N1 Failed to load overlay 00000004 LED:000000CC FAddr:0028540B LED:000000CC FAddr:0028540B LED:000000CC FAddr:0028540B What HDD is this? IF is 7200.12 / Barracuda LP then 'N1' command does not work. Also 'Failed to load overlay 00000004' can sometimes be related to a hardware error. With PCB and HSA attached does the HDD remain powered, or its spindle stops? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|